Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Analog Numeric Display
PostPosted: Thu Dec 13, 2012 4:58 am 

Joined: Thu Dec 13, 2012 4:22 am
Posts: 2

Offline
Hi,
Is it possible to display the separator for the Analog Numeric as a decimal point instead of a comma on a T10A HMI?

When I develop and simulate on my development pc it is displayed as a decimal point but when downloaded it is displayed as a comma.

Thanks,
Alan


 Profile  
 
 Post subject: Re: Analog Numeric Display
PostPosted: Thu Dec 13, 2012 8:49 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Try upgrading the unit's firmware and using iX Developer 2.0.463.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: Analog Numeric Display
PostPosted: Thu Dec 13, 2012 9:43 am 

Joined: Thu Dec 13, 2012 4:22 am
Posts: 2

Offline
Hi Mark,

Thanks for the reply, it worked a treat after I updated the HMI firmware.

Regards,
Alan


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron