Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: D sub relay with IX TAxxx
PostPosted: Thu Jan 24, 2013 10:25 am 

Joined: Wed Jan 23, 2013 2:01 am
Posts: 33

Offline
Is there a solution to activate the external relay (beijer reference : D sub relay) with an IX panel?


 Profile  
 
 Post subject: Re: D sub relay with IX TAxxx
PostPosted: Fri Jan 25, 2013 10:00 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Hi,

I have attached an example project, but it's made in iX 1.30. The script in the example should work in latest iX as well.

iX Scripting - How to control the RTS signal in COM1 Controlling the D-sub relay \ external buzzer:

An external buzzer can be utilized by using the so called D-SUB relay.
It's a relay housed in a 9 pin d-sub, that's activated by the RS-232 port RTS signal ( pin 7 )

This is an example of how to control the RTS signal in a COM port by using script. The reason for this example to give an example of how to use the external D-Sub Buzzer and D-Sub Relay for Exter together with iX.

When the startup screen is loaded an init of COM1 is made. (script) Control of the RTS signal is made using the two buttons (script)


Attachments:
RTSControl.zip [15.97 KiB]
Downloaded 250 times

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: