Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: USB drive update not working
PostPosted: Thu Apr 17, 2014 12:26 pm 

Joined: Wed Mar 27, 2013 1:49 pm
Posts: 17

Offline
It seems that T7AM units is not reading the USB drive during the boot process and loading the existing project. I tried several times and with different flash drives. No dialog is showing to install the project. I have following folders and files in the flash drive:

Project
TransferBinaries
TransferClient.exe
TransferClient.exe.config

Thanks.


 Profile  
 
 Post subject: Re: USB drive update not working
PostPosted: Fri Apr 18, 2014 1:42 am 

Joined: Wed Jun 27, 2012 1:17 am
Posts: 73
Location: CZ

Offline
Hi there,

What USB did you use.

The USB memory stick must follow the standard for the USB mass storage device class. There is a certification process for USB products and if the product pass this testing, it supports one of the USB classes.

USB Recommended
http://www.beijerelectronics.com/web/we ... 170049D92E

BR
JohanCZ


 Profile  
 
 Post subject: Re: update not working
PostPosted: Mon Mar 16, 2015 8:53 am 

Joined: Fri Mar 13, 2015 8:57 am
Posts: 1

Offline
I think your USB drive have some internal problem. so at first you try to solve this problem. Then you can try to update your USB drive. Thanpk you.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron