Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: iX T15BM connected to DOT MATRIX Printer Epson/USB or Serial
PostPosted: Tue Nov 11, 2014 9:42 am 
User avatar

Joined: Fri Feb 14, 2014 8:26 am
Posts: 4
Location: Greece

Offline
Hello everybody,

I try to connect the T15BM with a dot matrix printer via USB but I am not sure that if it is supported as its printing method is dot matrix.

Also, I tried to connected it serial from COM2-RS422 via the Beijer BDC-JetCon RS422toRS232 converter but without success. I don't understand where should I connect the DTR signal from the Printer.

At the past I connected the Exter series with this printer via the CAB6 cable.
But now the iX series has 9-pin RS422 and not 25-pin.

I would appreciate any help.

_________________
We could accomplish many more things if we didn't think of them as impossible.


 Profile  
 
 Post subject: Re: iX T15BM connected to DOT MATRIX Printer Epson/USB or Se
PostPosted: Thu Dec 04, 2014 7:22 am 

Joined: Wed Jun 27, 2012 1:17 am
Posts: 73
Location: CZ

Offline
Hi,

Because Windows Embedded CE has only a PCL printer driver, the following registry key entry is hard-coded into the registry to load the PCL driver. This enables testing all USB printers that support PCL print format.

Non-PCL printers still support ASCII-only printing with the default PCL driver.
To support printing on non-PCL printers,
Therefore, the printer driver shows up in Microsoft® WordPad for Windows Embedded CE word processing software with LPT1:


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron