Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: How can be accessed the QTERM-A7 SERVICE MENU
PostPosted: Mon Feb 13, 2012 2:56 am 

Joined: Mon Feb 13, 2012 2:33 am
Posts: 4

Offline
Sorry for my english...

manual says:

Quote:
The service menu for the operator panel can be accessed before a project is downloaded, or by setting the mode switches in mode 1000. The location of the mode switches is described in the installation manual for the operator panel.


When I still have in operator panel downloaded project, i am not be able to access the service menu for calibrate touch screen, here is not any switches...

How I do it? thanks very lot.


 Profile  
 
 Post subject: Re: How can be accessed the QTERM-A7 SERVICE MENU
PostPosted: Tue Feb 14, 2012 5:33 pm 

Joined: Wed Jan 04, 2012 11:17 am
Posts: 42

Offline
Press and hold your finger on the screen while applying power. Hold you finger on it until the calibration screen appears. You can then follow the instructions on the screen.

_________________
Best Regards,

Beijer Electronics, Inc.
Skylar Walker | Applications Engineer


 Profile  
 
 Post subject: Re: How can be accessed the QTERM-A7 SERVICE MENU
PostPosted: Wed Feb 29, 2012 2:57 am 

Joined: Mon Feb 13, 2012 2:33 am
Posts: 4

Offline
Thanks for your answer, it is good method - tested.


 Profile  
 
 Post subject: Re: How can be accessed the QTERM-A7 SERVICE MENU
PostPosted: Mon Feb 22, 2016 12:57 am 

Joined: Sun Feb 07, 2016 1:39 pm
Posts: 6

Offline
Hello,
Is it possible to add a button to access to the calibrate touch or a c# code to enable this whithout to press the screen to the start.
best regards.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: