Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: non-volatile Tags
PostPosted: Thu Oct 23, 2014 3:22 am 

Joined: Fri Oct 10, 2014 1:39 am
Posts: 4

Offline
Hello,
I'm using a T4A beijer screen with a Siemens CP1200 Automate.
I have a problem with non-volatile Tags .
In ix Dev I mark two Tags as non volatile Tags but when I restart the panel they always reset to 0.

My Tags are linked on two comboBox and are in read/Write. They are not lnked on the CP1200 'cause I've heard that there is no way to get non-volatile Tags by this way.

Can anybody help me 'cause I become slowly crazy about this stuff. :evil:

Thanks for help guys.

G.Schadegg
R&D Engineer Electronic


 Profile  
 
 Post subject: Re: non-volatile Tags
PostPosted: Mon Jan 05, 2015 12:21 am 

Joined: Fri Oct 10, 2014 1:39 am
Posts: 4

Offline
Hello and happy new year.

Problem is not solved, think it's a bug in the iX dev... I've done this in another way then I thank you for your help everybody.

_________________
G.Schadegg
Electronic R&D Engineer


 Profile  
 
 Post subject: Re: non-volatile Tags
PostPosted: Mon Feb 15, 2016 6:47 pm 

Joined: Mon Feb 15, 2016 6:38 pm
Posts: 1

Offline
Hi,
Sorry this is probably too late but I just found out that non-volatile is only available for internal tags, as per page 88 of MAEN831L. Not sure if your tags are internal?
Cheers
Cliff


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron