Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Custom Data Logging to USB
PostPosted: Mon Apr 13, 2015 10:42 am 
User avatar

Joined: Wed Apr 09, 2014 3:16 pm
Posts: 36

Offline
This program will generate a .csv file on an attached USB drive. It can be modified to log to the internal Project Files folder instead. This type of logging is useful if you need to add custom data into the log file, or if you are worried about size limitations on the panel. iX Developer 2.10 SP3 and greater have the ability to FTP to an attached flash drive or SD card.

The program will start logging at boot-up. There are functions that can be called or buttons with actions that can be used, to stop logging, and to restart logging. You could use the built in scheduler to stop logging at a certain time of the day, and then start logging. This will create a new log file with a new timestamp.

Program compiled with iX Developer 2.10 SP3 (2.16.154.0).


Attachments:
CSVAutoSavetoUSB.zip [68.81 KiB]
Downloaded 1186 times

_________________
Best Regards,

Kyle W. | Applications Engineer
Beijer Electronics, Inc.
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: