Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Soft reboot when valid project detected on USB
PostPosted: Thu Apr 16, 2015 11:47 am 
User avatar

Joined: Wed Apr 09, 2014 3:16 pm
Posts: 36

Offline
This project has a thread that looks for a valid project on a connected USB. When a valid project is detected, it initiates a soft reboot when the timer reaches 100 seconds. The timer was put in to give an operator time to pull the USB out of the panel after it successfully loads. Warning: leaving the USB connected that contains a valid project will continuously reboot the panel every 100 seconds.


Attachments:
UsbRebootAndLoad.zip [840.64 KiB]
Downloaded 543 times

_________________
Best Regards,

Kyle W. | Applications Engineer
Beijer Electronics, Inc.
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron