Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Transfer project to a non-visible panel manually
PostPosted: Thu Nov 17, 2011 2:19 am 

Joined: Thu Nov 17, 2011 2:10 am
Posts: 49
Location: Norway

Offline
Hi,

I've upgraded my iX software to version 1.31 and have encountered some problems with project transfer.

In the previous version I could manually write the IP-address to a touch panel which was not visible in the transfer menu.
In the new version this is not possible, you would need a visible panel first -> mark it -> change the IP-address and then transfer.

I encounter this problem each time I'm about to transfer a project to a panel through a VPN-connection.


 Profile  
 
 Post subject: Re: Transfer project to a non-visible panel manually
PostPosted: Thu Nov 17, 2011 10:12 am 
User avatar

Joined: Fri Jul 15, 2011 3:21 pm
Posts: 214

Offline
Thanks the post. This is a known bug and is being worked on. It is a high priority.

_________________
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer


 Profile  
 
 Post subject: Re: Transfer project to a non-visible panel manually
PostPosted: Tue Nov 29, 2011 1:08 am 

Joined: Thu Nov 17, 2011 2:10 am
Posts: 49
Location: Norway

Offline
When can we expect a bug-fix?


 Profile  
 
 Post subject: Re: Transfer project to a non-visible panel manually
PostPosted: Tue Nov 29, 2011 9:18 am 
User avatar

Joined: Fri Jul 15, 2011 3:21 pm
Posts: 214

Offline
The next version of iX Developer which is planned for the end of 1st or early 2nd quarter next year. It's still a ways away so dates could change.

Are you interested in using a beta version?

_________________
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer


 Profile  
 
 Post subject: Re: Transfer project to a non-visible panel manually
PostPosted: Wed Nov 30, 2011 4:49 am 

Joined: Thu Nov 17, 2011 2:10 am
Posts: 49
Location: Norway

Offline
Yes, if that bug is fixed I would like to try it, as I haven't encountered any other problems with v1.31


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron