Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Unable to import E-Designer project into iX Developer
PostPosted: Sat Jul 04, 2015 6:26 am 

Joined: Sat Jul 04, 2015 6:13 am
Posts: 25

Offline
iX Developer 2.10
E-Designer 7.1

I select the .MPA file for import to an iX T12B. I get twenty or so
    Conversion discarded for ___
and three
    No converter for element <Driver>
See attached image.

Should the software import an E-Designer 7.1 project?

What do I do next?

Many thanks.


Attachments:
File comment: .MPA file import error
iX import error.png
iX import error.png [ 92.28 KiB | Viewed 1440 times ]
 Profile  
 
 Post subject: Re: Unable to import E-Designer project into iX Developer [S
PostPosted: Thu Jul 09, 2015 4:42 pm 

Joined: Sat Jul 04, 2015 6:13 am
Posts: 25

Offline
Tech support told me to
- open the project in e-Designer,
- change to E1101 and save.
- import into iX Developer, in my case selecting the iX T12B as target.
- You also need to copy any graphic symbols you created over to the new project folder. See below.

That worked but it doesn't do a great job. I'm going to have to resize every piece of text and redo all the buttons. (That's as far as I've got, for now.) You will also be prompted to select the graphic file for each graphic encountered during import. My project used grey, green and red LED graphics over a hundred times and I was prompted to select each one!


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron