Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Error Message
PostPosted: Tue Sep 20, 2016 10:30 am 

Joined: Wed May 29, 2013 9:18 am
Posts: 10

Offline
Hi all,

Trying to simulate my program, but I am getting an error message. See attached picture.

Attachment:
Capture.PNG
Capture.PNG [ 3.97 KiB | Viewed 2023 times ]


Any ideas what can be wrong?

Thanks!


 Profile  
 
 Post subject: Re: Error Message
PostPosted: Thu Sep 22, 2016 7:44 am 

Joined: Mon Jun 11, 2012 2:10 pm
Posts: 89

Offline
I've had this issue before ... anywhere in your code where you specify an interface, dll, or whatever with a CF suffix will not work when you try to simulate your code on a PC as your PC does not have the compact framework components loaded.

How I got around this was to use precompile headers (ex #ifdef) to switch between CF version and non-CF version and define NOTCF in all relevant files when simulating. I couldn't find any other method in iX, such as create define if simulating versus release build.

Hope this helps.

_________________
Adam M.
Controls Engineer
FlexEnergy


 Profile  
 
 Post subject: Re: Error Message
PostPosted: Thu Sep 22, 2016 7:57 am 

Joined: Wed May 29, 2013 9:18 am
Posts: 10

Offline
Thanks for the reply!

I think it is due to me using a VM to program the screens, never had an issue on my "native" machine.

Is there any way one could install the CF?


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: