|Page 1 of 1|
|Author:||tim.xu [ Fri Jul 14, 2017 1:59 pm ]|
|Post subject:||web browser|
I am adding a web browser object in the iX developer for X2 marine 7. The web browser is able to open a local html file. But it cannot access any website. The panel is connect to the Ethernet and I am program the panel over the connection. How can I verify the panel has access to the internet and the setting for the web browser is correct?
|Author:||Gabriel B. [ Mon Nov 06, 2017 3:58 pm ]|
|Post subject:||Re: web browser|
You will not be able to test with a website in simulation/run mode on your pc. You would need to test on the panel once it has been loaded. That should do the trick. If it doesn't please contact Beijer Support directly and we can get you up and going.
|Page 1 of 1||All times are UTC - 7 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group