Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Scaling and simulator
PostPosted: Fri Jun 15, 2018 5:21 am 

Joined: Fri Jun 15, 2018 4:45 am
Posts: 3

Offline
Hi,

1. I want to have on the HMI the tag that is both scaled and non-scaled. For example...in analog numeric I want to have some offset and gain and in another analog numeric I want to have basic value of the same tag (without offset and gain). Is this possible or do I need to program in 'Tags' two tags with the same controller tag name (address) but with different scaling parameters?

2. How can I simulate tags in offline mode? I have GX works 3 and want to offline simulate tags in iX Developer (in simulation mode) via MC protocol.

Regards

Luka


 Profile  
 
 Post subject: Re: Scaling and simulator
PostPosted: Tue Jun 26, 2018 11:15 am 
User avatar

Joined: Thu Nov 16, 2017 3:32 pm
Posts: 44

Offline
Not sure how to simulate tags in offline mode like you're asking, but an answer to your first question is: using 2 tags pointed to the same address and one with scaling and one without is probably the best way. Another way would be to keep a persistent variable in your code to reverse the scaling on the original tag.

_________________
iX Quick Links:
iX Reference Manual: http://beijerinc.com/download/index.php?id=ix/referencemanual
iX Video Tutorials: https://www.beijerelectronics.com/en/Products/software/ix-hmi-software/Vimeo___video___page


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: