Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: CoDeSys ARTI driver won't work after update.
PostPosted: Thu Jul 27, 2017 12:13 pm 

Joined: Wed Jun 27, 2012 11:17 am
Posts: 4

Offline
I updated the CoDeSys ARTI driver from version 4.01 to 4.07 and now the HMI is not able to communicate with the PLC.

We were using a TxA and since they were discontinued we moved to the X2pro. For this we had to update iX Developer from 2.0 to 2.3 and we have not been able to connect with our PLC over TCP/IP (Level 2 Route).

Please help!


 Profile  
 
 Post subject: Re: CoDeSys ARTI driver won't work after update.
PostPosted: Thu Aug 10, 2017 12:00 pm 

Joined: Wed Jun 27, 2012 11:17 am
Posts: 4

Offline
Never mind. We returned 10 and cancelled an order of another dozen of these HMIs and instead we replaced them with Automation Direct HMIs and are using Modbus to communicate.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron