Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: E1022 "transmission error" while uploading from HMI to PC
PostPosted: Sat Apr 20, 2019 8:38 am 

Joined: Sat Apr 20, 2019 8:18 am
Posts: 1

Offline
Good afternoon.

I am trying to upload the program from an E1022 HMI.
Connection is opening normally, uploading starts also normally but when reaches to "tx drv conf" it stops automatically, "transmission error" is received on e-designer and HMI returns to run mode.

I am using a fabricated Cab30 cable and i have tested three different USB to serial adapters.

Just for your information i am trying to replace the HMI, because functions buttons are not working.

Thanks in advance.


 Profile  
 
 Post subject: Re: E1022 "transmission error" while uploading from HMI to P
PostPosted: Mon Apr 29, 2019 3:00 pm 
User avatar

Joined: Thu Nov 16, 2017 3:32 pm
Posts: 81

Offline
We have noticed with USB adapters the ones that contain the FTDI chip have a higher success rate. Do you know if any of your USB adapters utilize this chip?

Also, what about the buttons are failing?

_________________
iX Quick Links:
iX Reference Manual: https://www.beijerelectronics.com/en/Support/Help___online?docId=68072
iX Video Tutorials: https://www.beijerelectronics.com/en/Products/software/ix-hmi-software/Vimeo___video___page


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron