Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: How to change Controller TCPIP addr without IxDev?
PostPosted: Tue Jan 17, 2012 9:01 am 

Joined: Tue Jan 17, 2012 8:57 am
Posts: 19

Offline
We need to change the GE Controller TCPIP address with out using iX developer when our production/service group installs a HMI. Is there an action or scripting utility to change the controller IP address on the fly?

_________________
Bob Livingston
Sr Controls Engineer
FlexEnergy Energy Systems
30 New Hampshire Ave
Portsmouth, NH 03801
USA


 Profile  
 
 Post subject: Re: How to change Controller TCPIP addr without IxDev?
PostPosted: Tue Jan 17, 2012 10:27 am 
User avatar

Joined: Fri Jul 15, 2011 3:21 pm
Posts: 214

Offline
Yes, you can change the target PLC IP address or other controller settings at run-time using the "Change Active-Controllers" action. The terminal will need to be rebooted for the settings to take effect after the change. There is not a way to do this with script.

_________________
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: