Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Muliple hmi's
PostPosted: Thu Mar 28, 2013 11:51 am 

Joined: Thu Mar 28, 2013 11:12 am
Posts: 1

Offline
Dear Sir
I'm a new user of ix developer and I'm facing a problem on how is
possible to connect more than one HMI's to a controler.
I prefer to work on T4A but if this cannot be achived using T4A which
model is capable?

About remote access is it valid on T4A?
If yes are there any suggestions about which VNC client software
operates better with Beijer.

Thanks in advance
Stam


 Profile  
 
 Post subject: Re: Muliple hmi's
PostPosted: Thu Mar 28, 2013 12:37 pm 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Yes, you can do VNC with the T4A. Any VNC client should work. I have used TightVNC before with the units.

Connecting multiple HMI's to the controller has more to do with the controller than the HMI. You should contact your PLC manufacturer and ask if their unit can support multiple HMI's.

You could connect two HMI's together by making one of them a Modbus Master, and the other a Modbus Slave. Or use the OPC UA server and make the other a OPC UA client.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron