Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: TA 150
PostPosted: Thu Aug 15, 2013 4:50 am 

Joined: Thu Aug 15, 2013 3:05 am
Posts: 1

Offline
Hello, we have panel TA 150 with installed project, connected with B&R x20 cp84. How communicate with panel through OPC server not to uploading the project from panel? Help please.


 Profile  
 
 Post subject: Re: TA 150
PostPosted: Thu Aug 15, 2013 5:42 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Here is a forum post that talks about the OPC server on our HMI panels. I can only help if you provide a detailed description of your complete setup including IP addresses and what exactly is going wrong.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: TA 150
PostPosted: Fri Feb 09, 2018 12:39 pm 

Joined: Wed Jan 31, 2018 4:45 pm
Posts: 2

Offline
Hi
I hope this reach you

We have the same here TA150 and connected to B&R x20cp1484-1, and there problem with communication sometimes but when I take the sd card out and put back I get communication but I get an error 1E0 on the panel which says main intialization not done , any idea? Also Is there away to connect to the project in the panel which I bileve I can't access it , I tried upload from the target using cross over cable but the download button is gryied so no way ,

Any advice please
Thank you very much


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: