Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: OPC UA Server Communication
PostPosted: Mon Aug 26, 2013 3:40 am 

Joined: Mon Aug 26, 2013 1:49 am
Posts: 2

Offline
i have ix panel t7a. now i want to communicate my pc software with ix panel t7a. i have activated opc ua server on ix panel and i have ip address andd port number. now i will write my communicate codes to my pc software. i want use visual studio 2013 and language is c# or vb.net. not important. is there any code samples how can i get tag status from ix panel to my visual stdudio .net application?
thanks


 Profile  
 
 Post subject: Re: OPC UA Server Communication
PostPosted: Mon Aug 26, 2013 9:46 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Normally people use an OPC UA client to get data from an OPC UA server. I do not know of any .NET libraries that would allow you to connect to a OPC Server via your PC program. There should be some available as OPC is a common protocol.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: OPC UA Server Communication
PostPosted: Tue May 20, 2014 6:41 am 

Joined: Thu Nov 17, 2011 2:10 am
Posts: 49
Location: Norway

Offline
By running iX 2.10 (runtime on PC) as UA-server I've been able to read server information and variables through Unified Automation UaExpert - as a client...

Do you have any examples for a C#-program running as client to iX Runtime "server"?


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron