Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: iX T7A communication with a PLC to controll a FR-A700
PostPosted: Mon Feb 27, 2012 4:41 am 

Joined: Tue Nov 29, 2011 1:11 pm
Posts: 1

Offline
I have a school project were we are supposed to controll a frequency converter (FR-A700) trough a PLC (FX3U-series).

In GX Developer we are using a blocked-type called DpFR_A7NpPpo1FX3U.

I now have problems to set the parameters from the iX panel to the function block in the PLC.


Attachments:
Blokk vi skal bruke.jpg
Blokk vi skal bruke.jpg [ 136.42 KiB | Viewed 2455 times ]
 Profile  
 
 Post subject: Re: iX T7A communication with a PLC to controll a FR-A700
PostPosted: Mon Feb 27, 2012 11:34 am 

Joined: Wed Jan 04, 2012 11:17 am
Posts: 42

Offline
Have you looked at the documentation for the FX-Series Driver?


Attachments:
HelpFile.png
HelpFile.png [ 111.58 KiB | Viewed 2448 times ]
AccessHelp.png
AccessHelp.png [ 133.58 KiB | Viewed 2448 times ]

_________________
Best Regards,

Beijer Electronics, Inc.
Skylar Walker | Applications Engineer
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: