Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: About Panasonic MEWTOCOL driver
PostPosted: Thu Oct 10, 2013 5:16 am 

Joined: Wed Jan 16, 2013 3:18 am
Posts: 13

Offline
Hi!

Does anyone know if the Beijer MEWTOCOL driver for Panasonic PLCs supports the expanded header (<) functionality or only the standard one (%)?

Also, has anyone tested the Beijer iX panels with Panasonic FP2-ET2 LAN card?

_________________
Best Regards,
Nikos X


 Profile  
 
 Post subject: Re: About Panasonic MEWTOCOL driver
PostPosted: Thu Oct 10, 2013 8:43 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Every controller has its own help file that defines how it can address a Controller.

Here is a pdf from the controller help file. Sorry for the bad formatting it didn't convert to a pdf very well.
Attachment:
MEWTOCOL_addressing.pdf [18.52 KiB]
Downloaded 702 times


We have not tested it with the FP2-ET2 LAN Card, but as long as it supports the protocol it should work.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: About Panasonic MEWTOCOL driver
PostPosted: Thu Oct 10, 2013 11:48 pm 

Joined: Wed Jan 16, 2013 3:18 am
Posts: 13

Offline
Mark, thank you very much for your immediate response.

The question was, if the driver supports the "<" header instead of the "%" one, in order to have more devices in each telegram (faster communication).

The support from Sweden answered that, unfortunately, it is not possible.

_________________
Best Regards,
Nikos X


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: