Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Kollmoregen KAS - communication questions
PostPosted: Fri Apr 04, 2014 12:55 pm 

Joined: Fri Apr 05, 2013 1:48 pm
Posts: 15

Offline
We currently communicate iX HMI -> MODBUS -> Kollmorgen KAS

Are there any other protocols we can use for the communications channel between the two?

If there are:
1) What hardware/software/firmware/other would be required to do that?
2) Would we have to recompile or make any other changes to our existing iX user interfaces that we've developed?

Thanks.


 Profile  
 
 Post subject: Re: Kollmoregen KAS - communication questions
PostPosted: Fri Apr 25, 2014 10:33 am 

Joined: Thu Jun 06, 2013 9:21 am
Posts: 61

Offline
Modicon Modbus Driver. If a third party simulation program like Modsim can communicate with a PLC, then there is a good chance that IX Developer will work with the PLC.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: