Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Specify target IP address in Project Transfer wizard
PostPosted: Mon Mar 19, 2012 10:45 am 

Joined: Tue Jan 17, 2012 8:57 am
Posts: 19

Offline
Is it possible to specify a target IP address in the project transfer wizard?

I have a T7A that lives behind a router that I can communicate with via iX Developer. Since broadcast messages can't go through the router, the panel doesn't show up in the connected targets list and thus I cannot specify it normally. Currently, I need to fail to download to a "seen" panel before I can redirect to the "hidden" panel - is there a better way?

_________________
Bob Livingston
Sr Controls Engineer
FlexEnergy Energy Systems
30 New Hampshire Ave
Portsmouth, NH 03801
USA


 Profile  
 
 Post subject: Re: Specify target IP address in Project Transfer wizard
PostPosted: Mon Mar 19, 2012 11:09 am 
User avatar

Joined: Fri Jul 15, 2011 3:21 pm
Posts: 214

Offline
Bob,

What you'll need to do is manually specify the IP address of the terminal you'll want to download to. Unfortunately, this is broken in version 1.31.93. I'll send you a link to a beta version where this is fixed.


Attachments:
Snap 2012-03-19 at 11.06.43.jpg
Snap 2012-03-19 at 11.06.43.jpg [ 32.22 KiB | Viewed 2423 times ]

_________________
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: