Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Using more then one MODICON TCP Slave Controller
PostPosted: Thu Jul 10, 2014 1:42 am 

Joined: Thu Jul 10, 2014 1:27 am
Posts: 1

Offline
Hello

I am using the MODICON driver Version 4.16.02 on a ix T15BR Display. I am trying to install two Modbus slave controllers using different TCP ports. As soon as I have installed a second slave controller none of the two controllers are working.

Is it possible to use more than one modbus slave controller?


 Profile  
 
 Post subject: Re: Using more then one MODICON TCP Slave Controller
PostPosted: Mon Apr 02, 2018 4:14 pm 

Joined: Mon Nov 20, 2017 5:29 pm
Posts: 43

Offline
Lindenmaier,

Unfortunately this will not work. Even though you are adding multiple slaves drivers there is only one slave (the panel). You cannot do it in this way. You could have one of your two masters write to a different group of registers than the other and keep them both connected. If you provide a bit more detail about your application we may be able to come up with a better solution.

_________________
Thanks,

Chris
Beijer Support
(801)708-6690


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: