Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Serial Communication Error
PostPosted: Thu Jul 24, 2014 7:12 pm 

Joined: Thu Jul 24, 2014 7:03 pm
Posts: 1

Offline
Hello.

I am user of ix T15C. I am trying to communicate with modbus.

I checked modbus master with Ethernet TCP/IP. It works well. :D
But modbus serial did not work. :?
Modbus master ixT15C did not send anything. :?
So I checked hardware using serial communication program like hyper terminal.
I checked that ixT15C did not send anything.
What is problem? :? :?
What should I do?

Thanks
Son JK


 Profile  
 
 Post subject: Re: Serial Communication Error
PostPosted: Wed Jul 30, 2014 9:44 am 
User avatar

Joined: Wed Apr 09, 2014 3:16 pm
Posts: 36

Offline
Please check the default station that you have set. iX sets it to 0 by default and it should be 1 (please see screenshot). Double check the baud and communication protocols. If changing the default station doesn't work, please compress your project in iX by selecting Project -> Compress Project. This will create a .zip file that you can send to us at: support@beijerinc.com where we will be able to load your code and look at it.


Attachments:
ChangeDefaultStation.png
ChangeDefaultStation.png [ 199.97 KiB | Viewed 3162 times ]

_________________
Best Regards,

Kyle W. | Applications Engineer
Beijer Electronics, Inc.
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: