Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Micro830 communication with Beijer HMI T7F
PostPosted: Tue Aug 05, 2014 8:05 am 

Joined: Tue Aug 05, 2014 7:09 am
Posts: 1

Offline
Hello Everyone,

I am new at development on Beijer HMI. So don't know much about it.
I am working on Micro830 PLC. I am using Beijer's T7F model (HMI).
How do I create tags in HMI for this controller? As there are no addresses in this PLC like (B3, N7, F8 etc..)

Please guide me.

Thanks,
Shailesh


 Profile  
 
 Post subject: Re: Micro830 communication with Beijer HMI T7F
PostPosted: Tue Aug 19, 2014 12:57 am 

Joined: Tue Aug 19, 2014 12:18 am
Posts: 2

Offline
Hello Everyone,

It is not possible to do direct communication with Micro830. We have to use Modbus protocol for same. I hv tried it and worked for me.

Thanks.


Why does it take so much time to get approval for queries from Moderator? As compared to Siemens forum, response to threads is very slow for Beijer iX talk forum. As early the topics get approved, more users will be able to see the posts and can solve it. Thats just little suggestion from me. Because, I have used Siemens forum very oftenly, and I generally get reply within 2 to 3 hours.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron