Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Hide "message" when Modbus Slave RTU/TCP is disconnected
PostPosted: Mon Apr 02, 2012 3:19 pm 

Joined: Tue Jan 17, 2012 8:57 am
Posts: 19

Offline
Is there a setting to hide the "comm error window" when there is no device connected to the Modbus slave driver?

_________________
Bob Livingston
Sr Controls Engineer
FlexEnergy Energy Systems
30 New Hampshire Ave
Portsmouth, NH 03801
USA


 Profile  
 
 Post subject: Re: Hide "message" when Modbus Slave RTU/TCP is disconnected
PostPosted: Tue Apr 03, 2012 2:24 pm 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Hi Bob,

In the Modbus Master driver there is an option to Hide Comm Error under the 'Advanced' section of the Modbus Master driver settings. Unfortunately the Modbus Slave driver doesn't have that option. Which means that there is no way to hid the comm error when using the Modbus Slave driver.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: Hide "message" when Modbus Slave RTU/TCP is disconnected
PostPosted: Tue Apr 17, 2012 12:21 pm 

Joined: Tue Jan 17, 2012 8:57 am
Posts: 19

Offline
What are the command options to the driver?

Simply, I don't want the comm error window shown because nobody is connected to the device/driver.


 Profile  
 
 Post subject: Re: Hide "message" when Modbus Slave RTU/TCP is disconnected
PostPosted: Tue Apr 17, 2012 1:28 pm 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Hi Bob,

In information Designer 1.52 in the Modbus Slave Driver options you can try typing in XDNCW in the "Command Line Options" text box like is shown in this picture. This command is being phased out in newer drivers.

Attachment:
pic00778.gif
pic00778.gif [ 16.22 KiB | Viewed 3293 times ]

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: