Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: iX T12B to Mitsubishi FX5U Ethernet - Comm err [Solved]
PostPosted: Mon Aug 31, 2015 10:20 am 

Joined: Sat Jul 04, 2015 6:13 am
Posts: 25

Offline
Software
    iX Developer 2.10
    GX Works3

Hardware
    HMI - Beijer iX T12B
    PLC - Mitsubishi FX5U

Error
HMI shows "Controller 1: Comm err station 0".

Has anyone succeeded in getting these two to talk? IP addresses are OK.

iX Developer is configured as shown below:
Image Image

Note the [port setting above. I can't find any documentation on what the PLC is expecting or what's special about 1025.

The PLC is setup as below with GX Works3:
Image

Anyone got any ideas how to get the two talking? Many thanks.


Last edited by Transistor on Wed Sep 02, 2015 3:48 pm, edited 1 time in total.

 Profile  
 
 Post subject: Re: iX T12B to Mitsubishi FX5U Ethernet - Comm err [Solved]
PostPosted: Tue Sep 01, 2015 11:47 am 

Joined: Sat Jul 04, 2015 6:13 am
Posts: 25

Offline
I figured it out.

PLC configuration using GX Works3
Image

Image

HMI configuration using iX Developer


Image

Hit the Controller button ...

Image

Hit the Settings button ...

Image

Image


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: