|Modbus use of preset holding register (function 0x10)
|Page 1 of 1|
|Author:||charlyprouteau [ Thu Feb 25, 2016 9:57 am ]|
|Post subject:||Modbus use of preset holding register (function 0x10)|
I use modbus master controller.
I would like to write some UINT16 with function code 0x10.
For example, I would write 5 UINT16:
When I modified the value of each register, each register are sent one by one :
one request per register with function code 0x10. I also tryed to modified the register values by Scripting but same result.
I can use UINT 32 to send two registers but how can I do to writemore than 2 registers.
|Page 1 of 1||All times are UTC - 7 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group