iX Talk
http://beijerinc.com/support/ix/forum/

Changing IP-settings in HMI
http://beijerinc.com/support/ix/forum/viewtopic.php?f=5&t=2204
Page 1 of 1

Author:  c.bakelaar [ Mon Jul 03, 2017 4:16 am ]
Post subject:  Changing IP-settings in HMI

Hello,

For the moment I have a situation where I have a Siemens PLC and a Beijer T7BR screen, which have been communicating with each other in the past.

Due to the IP-range of the customer the IP settings should be changed so they can get the communication between the PLC and their SCADA.

The IP address of the PLC is changed according to their range.

The IP address of the HMI also needs to be changed, in IX developer their is a possibility to create an 'Show IP settings'. Which will show the IP settings of the HMI. If I change the IP settings in this action, will the IP address of the HMI also change, or do I need to upload a new project with the IP address already changed?

Please help me,

With Kind Regards,

Colin

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/