Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Changing IP-settings in HMI
PostPosted: Mon Jul 03, 2017 4:16 am 

Joined: Mon Jul 03, 2017 3:25 am
Posts: 1

Offline
Hello,

For the moment I have a situation where I have a Siemens PLC and a Beijer T7BR screen, which have been communicating with each other in the past.

Due to the IP-range of the customer the IP settings should be changed so they can get the communication between the PLC and their SCADA.

The IP address of the PLC is changed according to their range.

The IP address of the HMI also needs to be changed, in IX developer their is a possibility to create an 'Show IP settings'. Which will show the IP settings of the HMI. If I change the IP settings in this action, will the IP address of the HMI also change, or do I need to upload a new project with the IP address already changed?

Please help me,

With Kind Regards,

Colin


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron