iX Talk
http://beijerinc.com/support/ix/forum/

controller2: comm err: conn 0
http://beijerinc.com/support/ix/forum/viewtopic.php?f=5&t=2216
Page 1 of 1

Author:  abdelhak [ Thu Aug 03, 2017 4:09 am ]
Post subject:  controller2: comm err: conn 0

Hello;
I have a plc ALLEN BRADLEY and HMI BEIJER IX10T, my HMI is currently connected with a plc MITSUBISHI but all inputs / outputs of this plc are full.
But I want to add a pressure controller with PLC ALLEN BRADLEY and add two (2) tag in HMI for communication.
Hmi give this error message: controller2: comm err: conn 0
1- Controller Configuration, I added the Allen Bradley Controller (see image: the choice controller)
Select Brand: Allen_Bradley
select protocol: Ethernet/IP
2- Settings (see image : settings)
3-Stations(see image : stations)
take please:
HMI IP ADRESS: 10.10.12.40
Attachment:
stations.PNG
stations.PNG [ 23.49 KiB | Viewed 524 times ]

CONTROLLER IP ADRESS: 10.1012.10
any help please
best regards

Attachments:
The choice of controller.PNG
The choice of controller.PNG [ 30.5 KiB | Viewed 524 times ]
settings.PNG
settings.PNG [ 19.4 KiB | Viewed 524 times ]

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/