Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Assigning the target controller IP address programmatically
PostPosted: Tue Nov 28, 2017 4:39 pm 

Joined: Mon Jun 13, 2016 4:03 pm
Posts: 6

Offline
There are several similar machines, different only in IP addresses.
Is it possible to read a display own IP address on boot, and use it to assign the necessary target controller IP address?


 Profile  
 
 Post subject: Re: Assigning the target controller IP address programmatica
PostPosted: Tue Jan 02, 2018 11:49 am 

Joined: Mon Nov 06, 2017 11:19 am
Posts: 13

Offline
Hi Sergie,
You are able to map the IP addresses to appropriate contollers using a ".db" file and upload it to the iX project. You can write a script to check/align IPs with Controllers on startup. If an IP address were to change on a panel, the panel will reboot with the correct mapping indicated from the ".db" file.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: