iX Talk
http://beijerinc.com/support/ix/forum/

Assigning the target controller IP address programmatically
http://beijerinc.com/support/ix/forum/viewtopic.php?f=5&t=2248
Page 1 of 1

Author:  Sergei Troizky [ Tue Nov 28, 2017 4:39 pm ]
Post subject:  Assigning the target controller IP address programmatically

There are several similar machines, different only in IP addresses.
Is it possible to read a display own IP address on boot, and use it to assign the necessary target controller IP address?

Author:  Gabriel B. [ Tue Jan 02, 2018 11:49 am ]
Post subject:  Re: Assigning the target controller IP address programmatica

Hi Sergie,
You are able to map the IP addresses to appropriate contollers using a ".db" file and upload it to the iX project. You can write a script to check/align IPs with Controllers on startup. If an IP address were to change on a panel, the panel will reboot with the correct mapping indicated from the ".db" file.

Page 1 of 1 All times are UTC - 7 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/