Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Bosch Rexroth Ethernet
PostPosted: Wed Jun 27, 2012 11:21 am 

Joined: Wed Jun 27, 2012 11:17 am
Posts: 4

Offline
I'm trying to communicate our Bosch-Rexroth MLD controller to a T7A through ethernet ip but the driver only has a serial connection option. Is there another driver I can use??


 Profile  
 
 Post subject: Re: Bosch Rexroth Ethernet
PostPosted: Wed Jun 27, 2012 11:36 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
No, there is not another driver you can use.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: Bosch Rexroth Ethernet
PostPosted: Wed Jul 18, 2012 12:54 pm 

Joined: Wed Jun 27, 2012 11:17 am
Posts: 4

Offline
I used the CoDeSys driver over ethernet TCP/IP and that worked out.
Thanks anyway.


 Profile  
 
 Post subject: Re: Bosch Rexroth Ethernet
PostPosted: Wed Jul 18, 2012 2:04 pm 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
That surprises me because that would mean that the Bosch-Rexroth MLD supports the Codesys ARTI protocol.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
 Post subject: Re: Bosch Rexroth Ethernet
PostPosted: Wed Jul 18, 2012 5:35 pm 

Joined: Fri May 25, 2012 7:44 am
Posts: 22
Location: Charlotte, NC. USA

Offline
mark.monroe wrote:
That surprises me because that would mean that the Bosch-Rexroth MLD supports the Codesys ARTI protocol.


Bosch-Rexroth uses CoDeSys 3* for the plc functionality on many of their products. While I don't use, or generally have access to the product line, I was at a customer site recently Diagnosing PROFINET IO Controller issues between customers MLC65 and a PROFINET Communications Card for a VFD from one of our Vendors. While on site I had an oportunity to use the software on a rolling test bench they provided and noted that the PLC programming side was definitely CoDeSys 3.

On a side note another of our Vendors (WAGO) also uses CoDeSys (v2 though) to implement the PLC functionality and IDE. The ARTI driver works quite well on it and only requires you enable symbol download, and setup the CoDeSys variables you want exported. Afterwards you can just import the Project's SDB file to populate the Tag List in iX Developer.

_________________
Best Regards,
Patrick Hall


 Profile  
 
 Post subject: Re: Bosch Rexroth Ethernet
PostPosted: Tue Aug 27, 2013 2:28 pm 

Joined: Fri Mar 22, 2013 6:36 am
Posts: 2

Offline
I just wanted to toss this in - I successfully connected to a Rexroth PPC-R running Indralogic 1.8 (and Synax 13, but I don't think that's relevant) via Ethernet.
The necessary settings in iX are to use a CoDeSys ARTI controller, port 1200, V2 TCP/IP Level 2 Route, Motorola Byte Order, ELAU Controller False.
Import the desired tags using the import button on the tag page and select the .sdb file from your compiled Indralogic project directory. Check off only the tags you need, you can add more later.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: