Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Upload communication error from T4A
PostPosted: Fri Jul 27, 2012 9:54 pm 

Joined: Fri Jul 27, 2012 9:47 pm
Posts: 1

Offline
Hi. I had a project get corrupted on my PC, so I thought I would be clever and recover it from the panel. The panel IP address shows correctly in the upload screen, but when I select upload it gives communication server error. Any ideas? Thanks.


 Profile  
 
 Post subject: Re: Upload communication error from T4A
PostPosted: Mon Jul 30, 2012 6:47 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
By default iX 2.0 does not upload source to the panel. Did you select the following check box when you transferred your project to the panel? It sounds like your panel does not have the project source code on it.

Attachment:
Snap 2012-07-30 at 07.45.26.png
Snap 2012-07-30 at 07.45.26.png [ 45.93 KiB | Viewed 2357 times ]

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: