Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Alarms Leds Power T7A
PostPosted: Tue Mar 19, 2013 4:41 am 

Joined: Wed Feb 20, 2013 4:30 am
Posts: 7

Offline
Hi,

I am new user of script and i don't know how to use.
I have a T7A monitor. This monitor has 4 leds at corners. I can change the colour of led only the up/left corner from the system Tags.
I want you to inform me how to change the colours of the others 3 leds and also I want it to enable when i have an alarm.
General, When i have an alarm to change the colour of leds to red.

Thanx


 Profile  
 
 Post subject: Re: Alarms Leds Power T7A
PostPosted: Thu Mar 21, 2013 4:52 am 
User avatar

Joined: Thu Nov 29, 2012 2:27 pm
Posts: 92

Offline
Hi There!

I have never used the T7A, but I´m pretty sure there is only one led in the panel...

_________________
Edmund Andersson

AITECH AB

Part of Beijer Integrator Group


 Profile  
 
 Post subject: Re: Alarms Leds Power T7A
PostPosted: Thu Mar 21, 2013 8:04 am 

Joined: Tue Mar 13, 2012 9:53 am
Posts: 824

Offline
Edmund is correct, there is only one LED on a T7A and that is the Power LED that you can control using the System Tags.

_________________
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: