Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Communication with motion control board
PostPosted: Thu Feb 02, 2012 7:07 am 

Joined: Thu Feb 02, 2012 2:13 am
Posts: 1

Offline
Hi,sir
With IX Developer. My original HMI develope with C#. I communication to Motion control board with Real time ethernet protocol. The Library made of DCOM. Can i include DCOM(DLL) into IX developer ?

http://www.bausano.net/axesbrain.asp

http://www.bausano.net/negozio/store/co ... oduct=1182


 Profile  
 
 Post subject: Re: Communication with motion control board
PostPosted: Thu Feb 02, 2012 11:19 am 
User avatar

Joined: Fri Jul 15, 2011 3:21 pm
Posts: 214

Offline
Looking at the documentation here:
http://www.bausano.net/download/axesbra ... ook_gb.pdf

It looks like the software written for that device was targeting Windows 98 and Windows 2000. You might have luck using the DLL's on a Windows XP device, but our panels have Windows Embedded CE 6.0.
http://www.beijerelectronicsinc.com/pro ... /index.php

We do off some higher end Industrial PC's that can support Windows XP also.
http://www.beijerelectronicsinc.com/pro ... .php?v=ipc

_________________
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron