How to change screens based off of a Tag value.

Ron L. · **Joined:** Fri Jul 15, 2011 3:21 pm **Posts:** 214

Create a Tag. The tag can be mapped to to an address on a PLC if that makes more sense for your system. For this example, I'll call the tag, "ScreenTag".

Click on the [...] button under the "Action" column.

Attachment:

tag_action.jpg [ 82.58 KiB | Viewed 7926 times ]

Here you can configure the properties of the "ScreenTag" to change screens depending on the value of the tag. For the attached screen shot, if I wanted to change to "Screen1", I would set the "ScreenTag" to be a value of 1.

Attachment:

screen_dynamic_tag_props.jpg [ 69.67 KiB | Viewed 7926 times ]