Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: How to change screens based off of a Tag value.
PostPosted: Thu Sep 22, 2011 11:24 am 
User avatar

Joined: Fri Jul 15, 2011 3:21 pm
Posts: 214

Offline
Create a Tag. The tag can be mapped to to an address on a PLC if that makes more sense for your system. For this example, I'll call the tag, "ScreenTag".

Click on the [...] button under the "Action" column.

Attachment:
tag_action.jpg
tag_action.jpg [ 82.58 KiB | Viewed 6281 times ]


Here you can configure the properties of the "ScreenTag" to change screens depending on the value of the tag. For the attached screen shot, if I wanted to change to "Screen1", I would set the "ScreenTag" to be a value of 1.

Attachment:
screen_dynamic_tag_props.jpg
screen_dynamic_tag_props.jpg [ 69.67 KiB | Viewed 6281 times ]

_________________
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron