|How to change screens based off of a Tag value.
|Page 1 of 1|
|Author:||Ron L. [ Thu Sep 22, 2011 11:24 am ]|
|Post subject:||How to change screens based off of a Tag value.|
Create a Tag. The tag can be mapped to to an address on a PLC if that makes more sense for your system. For this example, I'll call the tag, "ScreenTag".
Click on the [...] button under the "Action" column.
tag_action.jpg [ 82.58 KiB | Viewed 6649 times ]
Here you can configure the properties of the "ScreenTag" to change screens depending on the value of the tag. For the attached screen shot, if I wanted to change to "Screen1", I would set the "ScreenTag" to be a value of 1.
screen_dynamic_tag_props.jpg [ 69.67 KiB | Viewed 6649 times ]
|Page 1 of 1||All times are UTC - 7 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group