|How to debug script in an iX Developer project.
|Page 1 of 1|
|Author:||Ron L. [ Mon Jul 25, 2011 2:33 pm ]|
|Post subject:||How to debug script in an iX Developer project.|
You will need to install Visual Studio 2010 or Visual C# 2010 Express.
iX Developer must be configured to target the correct Visual Studio executable in order for the debugging to work. You can configure the target executable under "iX" -> "Options" -> "Script Debugger options" -> "Debugger".
ix_options.JPG [ 20.6 KiB | Viewed 12023 times ]
iX Developer configured for Visual C# 2010 Express.
ix_options2.JPG [ 27.43 KiB | Viewed 12023 times ]
Press the debug button to validate the project and start the external debugger with a generated project file.
debug_button.JPG [ 29.92 KiB | Viewed 12023 times ]
If you get a compile error about .NET Framework 4.0 not being installed, you can change the project settings to target the ".NET Framework 3.5" and re-compile.
target_3_5.JPG [ 60.24 KiB | Viewed 12023 times ]
Start debugging. If you get an exception you can try pressing F5 to continue.
pinvoke_exception.JPG [ 90.49 KiB | Viewed 12023 times ]
If you continue getting exceptions and are unable to debug your project, you can change your workspace to a "Panel Type" of PC and debug. You may want to do this after making a copy of your project.
settings_pc.JPG [ 58.82 KiB | Viewed 12023 times ]
|Page 1 of 1||All times are UTC - 7 hours [ DST ]|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group