Welcome Guest ( Login | Register )



All times are UTC - 7 hours [ DST ]



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Modbus use of preset holding register (function 0x10)
PostPosted: Thu Feb 25, 2016 9:57 am 

Joined: Wed Jan 23, 2013 2:01 am
Posts: 33

Offline
Dear sir,
I use modbus master controller.
I would like to write some UINT16 with function code 0x10.
For example, I would write 5 UINT16:
40001
40002
40003
40004
40005
When I modified the value of each register, each register are sent one by one :
one request per register with function code 0x10. I also tryed to modified the register values by Scripting but same result.
I can use UINT 32 to send two registers but how can I do to writemore than 2 registers.
Regards,


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: